Off The Bookshelf 54" Eye Hoe Handle Search Tools & Hardware

Bookmark the site

Return to Homepage

US Shopping
UK Shopping

Building Supplies & Heavy Equipment

Fire Safety & Home Security

Heating & Cooling

Lighting & Electrical

Outdoor Power & Lawn Equipment

Painting Tools & Supplies

Power & Hand Tools

Storage & Home Organization

Tools & Hardware : Search

Search Tools & Hardware - select a category

1.Seymour Mfg. WE-30 Grass Whip from: Seymour Mfg.
Average Rating: >>More Details
Got mine today and I sharpened it as soon as I took it out of the box. I used a 3/16ths inch diamond encrusted wheel on a Dremel tool and honed all the edges nicely. When I was done cutting weeds, I rinsed it off and gave it a coat of Boeshield to keep the bare metal from rusting up. I found the length to be fine and I am 6' 4" tall. It's a bit tricky trying to cut around buildings or near other obstructions or stones, etc. but I managed to get most of it and what remains can be pulled. I might put down a little gravel on such areas? I cut through some areas where there were thick tall stands of weeds with some difficulty. I don't think it would have been possible at all, if I hadn't sharpened it. It comes dull with a thick coat of blue paint over all the edges. Read More

2.41" Oval Hoe Handle from: SEYMOUR MFG CO
Average Rating: >>More Details
Got mine today and I sharpened it as soon as I took it out of the box. I used a 3/16ths inch diamond encrusted wheel on a Dremel tool and honed all the edges nicely. When I was done cutting weeds, I rinsed it off and gave it a coat of Boeshield to keep the bare metal from rusting up. I found the length to be fine and I am 6' 4" tall. It's a bit tricky trying to cut around buildings or near other obstructions or stones, etc. but I managed to get most of it and what remains can be pulled. I might put down a little gravel on such areas? I cut through some areas where there were thick tall stands of weeds with some difficulty. I don't think it would have been possible at all, if I hadn't sharpened it. It comes dull with a thick coat of blue paint over all the edges. Read More

3.Italian Grape Hoe Head from: SEYMOUR MFG CO
Average Rating: >>More Details
Got mine today and I sharpened it as soon as I took it out of the box. I used a 3/16ths inch diamond encrusted wheel on a Dremel tool and honed all the edges nicely. When I was done cutting weeds, I rinsed it off and gave it a coat of Boeshield to keep the bare metal from rusting up. I found the length to be fine and I am 6' 4" tall. It's a bit tricky trying to cut around buildings or near other obstructions or stones, etc. but I managed to get most of it and what remains can be pulled. I might put down a little gravel on such areas? I cut through some areas where there were thick tall stands of weeds with some difficulty. I don't think it would have been possible at all, if I hadn't sharpened it. It comes dull with a thick coat of blue paint over all the edges. Read More

4.Seymour Mfg. AU-S4 Post Hole Auger from: Seymour Mfg.
Average Rating: >>More Details
Got mine today and I sharpened it as soon as I took it out of the box. I used a 3/16ths inch diamond encrusted wheel on a Dremel tool and honed all the edges nicely. When I was done cutting weeds, I rinsed it off and gave it a coat of Boeshield to keep the bare metal from rusting up. I found the length to be fine and I am 6' 4" tall. It's a bit tricky trying to cut around buildings or near other obstructions or stones, etc. but I managed to get most of it and what remains can be pulled. I might put down a little gravel on such areas? I cut through some areas where there were thick tall stands of weeds with some difficulty. I don't think it would have been possible at all, if I hadn't sharpened it. It comes dull with a thick coat of blue paint over all the edges. Read More

5.Seymour Mfg. AU-A2 Adjustable Post Auger from: Seymour Mfg.
Average Rating: >>More Details
Got mine today and I sharpened it as soon as I took it out of the box. I used a 3/16ths inch diamond encrusted wheel on a Dremel tool and honed all the edges nicely. When I was done cutting weeds, I rinsed it off and gave it a coat of Boeshield to keep the bare metal from rusting up. I found the length to be fine and I am 6' 4" tall. It's a bit tricky trying to cut around buildings or near other obstructions or stones, etc. but I managed to get most of it and what remains can be pulled. I might put down a little gravel on such areas? I cut through some areas where there were thick tall stands of weeds with some difficulty. I don't think it would have been possible at all, if I hadn't sharpened it. It comes dull with a thick coat of blue paint over all the edges. Read More

6.Hog Rings from: Seymour Manufacturing
Average Rating: >>More Details
Got mine today and I sharpened it as soon as I took it out of the box. I used a 3/16ths inch diamond encrusted wheel on a Dremel tool and honed all the edges nicely. When I was done cutting weeds, I rinsed it off and gave it a coat of Boeshield to keep the bare metal from rusting up. I found the length to be fine and I am 6' 4" tall. It's a bit tricky trying to cut around buildings or near other obstructions or stones, etc. but I managed to get most of it and what remains can be pulled. I might put down a little gravel on such areas? I cut through some areas where there were thick tall stands of weeds with some difficulty. I don't think it would have been possible at all, if I hadn't sharpened it. It comes dull with a thick coat of blue paint over all the edges. Read More

7.Seymour Mfg. WE-40 Brush Cutter from: Seymour Mfg.
Average Rating: >>More Details
Got mine today and I sharpened it as soon as I took it out of the box. I used a 3/16ths inch diamond encrusted wheel on a Dremel tool and honed all the edges nicely. When I was done cutting weeds, I rinsed it off and gave it a coat of Boeshield to keep the bare metal from rusting up. I found the length to be fine and I am 6' 4" tall. It's a bit tricky trying to cut around buildings or near other obstructions or stones, etc. but I managed to get most of it and what remains can be pulled. I might put down a little gravel on such areas? I cut through some areas where there were thick tall stands of weeds with some difficulty. I don't think it would have been possible at all, if I hadn't sharpened it. It comes dull with a thick coat of blue paint over all the edges. Read More

8.Dandelion Lawn Weeder from: Seymour Mfg.
Average Rating: >>More Details
Got mine today and I sharpened it as soon as I took it out of the box. I used a 3/16ths inch diamond encrusted wheel on a Dremel tool and honed all the edges nicely. When I was done cutting weeds, I rinsed it off and gave it a coat of Boeshield to keep the bare metal from rusting up. I found the length to be fine and I am 6' 4" tall. It's a bit tricky trying to cut around buildings or near other obstructions or stones, etc. but I managed to get most of it and what remains can be pulled. I might put down a little gravel on such areas? I cut through some areas where there were thick tall stands of weeds with some difficulty. I don't think it would have been possible at all, if I hadn't sharpened it. It comes dull with a thick coat of blue paint over all the edges. Read More

9.Seymour Mfg. 2B-42B20 Bush Scythe Blade from: Seymour Mfg.
Average Rating: >>More Details
Got mine today and I sharpened it as soon as I took it out of the box. I used a 3/16ths inch diamond encrusted wheel on a Dremel tool and honed all the edges nicely. When I was done cutting weeds, I rinsed it off and gave it a coat of Boeshield to keep the bare metal from rusting up. I found the length to be fine and I am 6' 4" tall. It's a bit tricky trying to cut around buildings or near other obstructions or stones, etc. but I managed to get most of it and what remains can be pulled. I might put down a little gravel on such areas? I cut through some areas where there were thick tall stands of weeds with some difficulty. I don't think it would have been possible at all, if I hadn't sharpened it. It comes dull with a thick coat of blue paint over all the edges. Read More

10.54" Eye Hoe Handle from: SEYMOUR MFG CO
Average Rating: >>More Details
Happy with purchase. A little rough on the final finish. Will want to sand these a little or wear gloves. In all fairness these are as good or better than most of the wood replacement handles I see in the stores.

page 1 of 14
1 2 3 4 5 6 7 8 9 10 11 12 13 14

Off The Bookshelf gives you a unique shopping experience, you can find all the products you like within a few minutes online, locate the latest charting CD's, DVD's & Games, read user reviews on the bestselling Books and Household products. All items are available to buy Used (at a greater saving) or New (at a great discounted RRP). Add the items to your shopping basket, pay securely online and we send these products to be delivered to your door. We take great pride in being able to offer you the great savings partnering with Amazon, offering you cheaper prices than the high street retailers, we have thousands of discounts on all the the items you can buy off the shelf and hope you find the website easy to use.

Thanks for visiting and browsing Off The Bookshelf

In association with Amazon.com

SME-WS
HolidayHavens - Holiday Rental Accommodation